How To Fix Winload.Efi Missing After Clone

If you’ve cloned your Windows drive and are now getting the “Winload.Efi missing” error, don’t worry. This is a common problem, and there are a few easy ways to fix it. In this article, we’ll show you how to fix the Winload.Efi missing error in just a few minutes.

Fixes for the “Winloadefi missing or contains error” issue in Windows 10

If you’re seeing the “Winloadefi missing or contains error” message when you try to boot up your Windows 10 computer, don’t worry – there are a few easy fixes. First, try running the built-in Windows 10 Startup Repair tool. If that doesn’t work, you can try using the Bootrec.exe tool to repair the boot record. Finally, if all else fails, you can try reinstalling Windows 10 from scratch.

Reasons behind the error –

The error “winload.efi missing” can occur for a number of reasons. One common reason is that the file has been deleted from the computer’s hard drive. Another possibility is that the file has become corrupt and is no longer able to be used by the computer.

There are a few things that can be done to try and fix this error. One is to try and restore the winload.efi file from a backup. Another is to use a program like Windows System Restore to try and repair the file.

If neither of these options work, then it is likely that the only way to fix the error is to reinstall the operating system.

1 Enable CSM compatibility mode –

If your computer is having trouble booting after you’ve cloned your hard drive, it’s possible that the issue is due to the computer’s Compatibility Support Module (CSM) not being enabled. Enabling CSM compatibility mode will allow your computer to boot from the cloned hard drive. To do this, you’ll need to access your computer’s BIOS settings.

READ  What is info and describe in Python?

To access your BIOS settings, you’ll need to press a key during the boot process. This key is usually one of the F keys (F1, F2, F3, F10, or F12), the Esc key, or the Del key. If you’re not sure which key to press, consult your computer’s documentation or look for a message during the boot process that says “Press [key] to enter BIOS.”

Once you’re in the BIOS settings, look for a setting that says “CSM Compatibility” or “Boot Mode.” Change the setting to “Enabled” or “Legacy BIOS.” If you don’t see a CSM Compatibility setting, your computer’s BIOS may be too old to support booting from a hard drive that’s been cloned. In this case, you’ll need to update your BIOS.

Updating your BIOS can be a tricky process, so if you’re not comfortable doing it, you may want to take your computer to a professional.

2 Check system drive –

If the system drive is corrupted, you may experience the “winload.efi missing” error. To check if the system drive is corrupted, you can use the Windows Command Prompt to run the chkdsk command.

To do this, follow these steps:

1. Open the Command Prompt as an administrator.

2. Type the following command and press Enter: chkdsk C: /f

3. Wait for the scan to complete.

If the system drive is corrupted, you may need to repair it or replace it.

3 Run SFS –

If you are getting the “winload.efi missing” error after cloning your drive, it is likely because the clone did not properly copy over the EFI System Partition (ESP). The ESP contains important files needed for booting Windows, so you will need to use the SFS (System File Scanner) tool to fix any missing or corrupt files.

To run SFS, open the Command Prompt as Administrator and type the following command:

sfc /scannow

This will scan your system for any missing or corrupt files and replace them as necessary. Once the scan is complete, reboot your system and try again. If the problem persists, you may need to recreate your ESP from scratch.

READ  How to Fix the Malwarebytes Service High CPU Problem on Windows?

4 Rebuild BCD and MBR –

If your Windows installation is unable to boot because of the missing winload.efi file, you can rebuild the boot configuration data (BCD) and master boot record (MBR) to fix the problem.

To rebuild the BCD, you can use the Bootrec.exe tool included with Windows. To use Bootrec.exe, you’ll need to run it from the Windows Recovery Environment. To do this, you’ll need to boot from your Windows installation media and then select the “Repair your computer” option.

Once you’re in the Windows Recovery Environment, select the “Command Prompt” option. Then, type the following commands and press Enter after each one:

bootrec /fixmbr
bootrec /fixboot
bootrec /scanos
bootrec /rebuildbcd

These commands will rebuild the MBR and BCD and then scan your hard drive for any Windows installations that can be added to the BCD. Once the scan is complete, you should be able to boot into your Windows installation.

Frequently Asked Questions –

Q: Why is my computer telling me that the Winload.efi file is missing?

A: The Winload.efi file is a critical component of the Windows operating system. If it is missing, your computer will not be able to start up properly. There are a few possible reasons why this file might go missing:

-You recently performed a clean install of Windows, and the file was not properly copied over.

-You recently upgraded your hard drive, and the file was not properly transferred.

-Your computer’s boot partition is damaged or corrupted.

If you believe that the Winload.efi file is missing from your computer, you will need to take corrective action to fix the issue. Depending on the cause, you may be able to resolve the issue yourself, or you may need to seek professional help.

Q: How can I fix a missing Winload.efi file?

A: If the Winload.efi file is missing from your computer, you will need to take corrective action to fix the issue. Depending on the cause, you may be able to resolve the issue yourself, or you may need to seek professional help.

READ  How to Unlock Non-US Samsung Devices Locked by Regional Bootloader

If you recently performed a clean install of Windows, you can try restarting the installation process and making sure that the file is properly copied over.

If you recently upgraded your hard drive, you can try using a data recovery program to recover the missing file.

If your computer’s boot partition is damaged or corrupted, you will need to use a repair tool to fix the issue. Depending on the severity of the damage, you may be able to use a tool like chkdsk to fix the issue, or you may need to use a more sophisticated repair tool.

Q: What should I do if I can’t fix the missing Winload.efi file issue?

A: If you cannot fix the missing Winload.efi file issue, you will need to contact a professional for help. A professional can help you troubleshoot the issue and take corrective action to fix the problem.

How To Fix Winload.Efi Missing After Clone

Must Read

1. Check if your Windows installation disc is in the drive. If it is, take it out and then put it back in.

2. If you are using UEFI boot, make sure that your hard drive is formatted in FAT32.

3. Use Diskpart to clean your hard drive and then try to clone again.

4. Try using a different cloning software.

5. Check if your BIOS is set to boot from the correct drive.

6. Try using a bootable USB drive with the Windows installation files.

7. Reinstall Windows from scratch.

Conclusion

Thanks for taking the time to read our guide on how to fix the Winload.Efi missing error. We hope that this guide has helped you to resolve the issue and that you can now get back to using your computer without any problems. If you have any further questions or comments, please feel free to leave them in the section below.

Leave a Comment

Your email address will not be published. Required fields are marked *